Honor X10 protective shell exposure: equipped with lifting front camera to retain 3.5mm headphone jack

Following the Honor30 series, a brand-new 5G mobile phone called HonorX10 has recently been connected to the Ministry of Industry and Information Technology, and then the camera ’s ID photo was also officially exposed. Now there is the latest news. Recently, a well-known digital blogger has further published spy photos of the protective shell of the aircraft, and its appearance has been confirmed again.

According to the latest information released by the digital blogger @ 数码 闲聊 站, it is basically consistent with the previous exposure. The new HonorX10 will have a rear matrix four-camera module. The accidental words will be 3.5mm headphone jack, noise reduction microphone and lifting front camera, which further confirms that the machine will adopt a lifting full screen design, which is also Honor’s first mobile phone with lifting full screen in 2020. In addition, on the left side of the protective case (position in the figure), in addition to the volume key, there is still a clear depression below, which will also correspond to the side fingerprint recognition module.

In other respects, according to the previously exposed news, the new Honor10X will use a 6.63-inch display screen with a body size of 163.7 × 76.5 × 8.8mm. It is expected to be equipped with Kirin 820 5G SoC, CPU performance is 27% higher than previous generation Kirin 810, GPU graphics capability is increased by 38%, and NPU AI performance is increased by 73%. Rear RYYB filter array camera module, but there is no news to confirm this guess. In addition, the machine will be equipped with a battery with a capacity of 4200mAh. As for more configuration parameters, there is no more news.

It is reported that the new Honor10X will meet you in the near future. At present, the machine has officially entered the Ministry of Industry and Information Technology. We will wait and see for more detailed information.