Huawei P40 Pro reportedly adopts 16-in-1 technology

Huawei P40 Pro was previously reported to carry a 52MP main camera and a 1 / 1.33 inch outsole, and now there are more details exposed on the network. According to netizens familiar with industry chain information, the 52MP sensor used by Huawei P40 Pro this time will support 16-in-1 technology, which means that under the same sensor size as Samsung S20 Ultra, it can be used in night shooting and other environments. Output about 13MP photos. At the same time, there is also a breaking news @evleaks said on Twitter that Huawei P40 Pro will have a ceramic version launched, which is completely consistent with the news of this netizen in the past.

16-in-1 technology

Although Huawei will not be equipped with an ultra-high pixel camera on the upcoming Huawei P40 series, it is still preparing to use a 1 / 1.33-inch outsole for the legendary new 52MP main camera, and according to netizens familiar with the industry chain information, The 52MP sensor customized by Huawei will also use Quad Quad Bayer technology, which is a rumored 16-in-one technology, but this also seems to mean that it can only output photos of about 3.25 million pixels in night shooting and other environments.

However, according to information previously disclosed by industry insiders, the Sony IMX608 sensor used on the Huawei Mate 30 Pro for the first time is also Quad Quad Bayer technology, but it outputs about 10 million pixels of photos, so the 52MP sensor equipped with Huawei P40 Pro this time The photos output under low light environment should reach about 13 million pixels, plus the sensor area reaches 1 / 1.33 inches, and the night scene photos and videos will have higher purity.

Super vision sensor

At the same time, as the information provided by the netizen familiar with the industry chain information also said that the so-called 16-in-one technology is four-in-one and four-in-one, there may be a situation like this, which is the size upgrade of this 52MP sensor In the case of 1 / 1.33 inches, Huawei opened the 16-in-1 technology that IMX608 has adopted, which can output 3.25 million pixels of photos and videos under the extreme night scene environment, and use the advantages of a large single pixel area to obtain better pictures. quality.

In addition, it is also reported that Huawei has applied for trademarks such as Quad-Curve Overflow (Ultra-curved screen), Ultra Vision Camera, Ultra Vision Sensor, and 5G AR, which may be used in Huawei P40 series. Among them, Ultra Vision Sensor is literally the 52MP sensor that Huawei P40 Pro will carry. The specially registered trademark is on the one hand for marketing needs, and on the other hand it may be 16-in-1. Technology related.

Ceramic version will be pushed

In addition to using a larger base and 16-in-one technology for the main camera, Huawei P40 Pro will use a dual-prism periscope lens design for the first time, and bring ten times optical zoom and glass-plastic hybrid length Focus lens, and according to IHS mobile phone industry analysts said that the aircraft will be a 20MP periscope zoom solution.

It is worth noting that according to the breaking news @evleaks said on Twitter, Huawei P40 Pro will also be available in ceramic version, which is in line with the information previously disclosed by netizens familiar with the industry chain information. It is reported that Huawei P40 Pro will also be equipped with a four-curved screen of about 6.5 inches and a dual-hole front camera design. It will be equipped with Kirin 990 5G processor and pre-installed EMUI system based on Android 10. .